This dress was made based on an extant 1871 evening dress at the Fashion Museum Bath. There’s a picture of it in my first post. You can find the Making of posts here, here and here.
I really enjoyed the process of making this. It involved making a bustle cage, which was a first. I wore it over my Victorian corset, the bustle cage and two early bustle petticoats. The dress is made up of a bodice, a skirt and an overskirt. Like at the time, the bodice remains separate from the skirt. Since I have some leftover fabric, it might be nice to try an make a day bodice for this project at some point in the future! In the end, I had a lot of fun and I’m happy with a lot of the elements.
Once the skirts were done, I moved on to the sleeves. The sleeves were rather simple. As the bodice fell just off the shoulder, they didn’t need to fit in the same manner as normal sleeves. So to draft these, I simply drew an almost oval shape, longer than the armhole size so I could gather it down to make nice puffy sleeves.
I cut out two of them and then two long rectangles to make little cuffs. I made the cuffs in the same manner as usual, by interfacing it and then ironing the edges inwards like with a waistband. But this time, I added a piece of plastic boning to make them nice and round. I gathered the lower and bottom edges of the upper sleeve and then attached the bottom edge to the cuff, by slotting it into the middle of the cuff.
I sewed this by hand, so that there was no visible top stitching. They looked pretty adorable at this stage.
Then I attached them to the bodice with a double threaded back stitch, for sturdiness. Then I covered this seam with bias tape (as I’d ran out of lace tape by this point, oops!).
Sleeves were attached and I moved on to decorating the collar, as I wanted some hand-stitching. I wish I’d decided to do this before attaching it, as it would have been much easier, but alas. I ordered some sequins online and decided to attach them around the collar, to cover the awkward bias that was bothering me.
The last element for the bodice were the two little bows that are perched just over the shoulder on the original dress. I’d never made fabric bows before and two tiny ones took me a shameful amount of time. Like, I am literally ashamed. I turned all the edges inwards by hand, because I didn’t want top stitching, so this was what set me back. I cut some rectangles, two different sets, one set larger than the other. One rectangle for the main body, one for the tails. All the edges were turned inwards by hand and then the middles were gathered down.
After they were gathered, I tacked the two together and cut one long strip from the same fabric, about one inch wide, which I used to tie over the middle. Then I added sequins over the edges of this strip. Yes, they took forever, but they looked adorable so I forgave them.
I attached them to the bodice with some strong stitches. And with this done, the bodice was complete! The insides were a bit rough still, but I’m waiting for more lace tape to arrive so I can clean them up properly.
The last step was the trim made of the same fabric for the skirt. It would decorate the overskirt and also hide the side closure. For this, I cut some long strips of the fabric, and pleated them.
This was quite easy to do, because the stripes were good guidelines. Then I tacked them down very carefully on both edges, trying to keep my stitches as discreet as possible.
After that, I pinned them to the overskirt and sewed them down in the same way with the tacking stitches.
I was pretty happy with everything at this point, but too lazy to lace up the bodice on the dressform so instead here’s a 19th century crop top:
Last thing to do was to hem the skirt. I decided to use crinoline tape (also called horsehair tape) for this. It was quite hard to find in the shops at a reasonable price and wide enough, so I bought it online. It ended up being 13 cms wide. I lined it up with the edge of the right side of the skirt and sewed it down with a half an inch seam allowance, on the right side.
Then I turned it over to the wrong side and smoothed it over, making sure it was pulled tight, and pinned it in place. Then I used a herringbone stitch to secure it.
I also made a little placket from the fabric to cover the cut edges of the tape where they met, as they were quite rough.
And it was done! I learned a lot from this project. I liked all the decorating, but I also learned I have to take more time to sort out the fit, instead of getting excited and moving ahead. I still have some fabric left over so I think maybe a day bodice to pair with this might be fun to make sometime in the future. I don’t have edited pictures of this dress yet, so here’s a little sneak peek:
After the struggles with the bodice, I approached the skirts with a bit more care. I had a look at patterns for skirts of the time, and decided to go with a panelled skirt. Thankfully the striped fabric I bought was wide enough to cut the skirt panels with the stripes. I hadn’t done a panelled skirt yet, I’ve only done rectangular skirts which are very easy. I made one petticoat once using a commercial pattern that was made up of panels. Keeping that in mind, I went about measuring everything (twice) and drafted up the skirt. I simply drew it directly on the fabric and cut out the pieces, each individually, and making sure that the sloped seams would match. The back also had to dip towards a small train. There was a front panel cut on the fold, two side fronts, two side backs and one extra wide back panel to fit over the generous bustle.
Unfortunately, I forgot to take photos of pretty much everything! (eck!) I cut out all the panels and made a waistband. I decided to leave a slit between the side front and side back panels on the left side. It couldn’t be on the back as usual because it had to fit nicely over the bustle back – and the side bit would be covered by the overskirt so it would be okay. I sewed up all the seams together with french seams for neatness (to compensate for the messiness of the bodice I guess).
They are a bit tedious, but they do work well. The only thing that annoyed me was that because the fabric is quite strange, it didn’t take well to being ironed. So after I sewed the second seam, it wouldn’t iron properly so it doesn’t look very flat. But oh well! I also only then decided to interface the top portion of the skirt, to support the pleats better. I wish I’d done it before sewing, as it was hard to interface the sloped waist line. I left a six inch gap on the left side seam, to get in and out. I turned these edges inwards by band, and then I fit into the waistband.
The waistband was my desired width and my waist measurement plus seam allowances. I interfaced it, then ironed the long edges 1/2” inwards and then ironed it in half. Then I sewed the edges, right side to right side, and turned it the right way out.
I pleated the back to fit into the waistband, and then sewed over the waistband, the half that would be hidden by machine and the other half by hand. I added a hook and bar, and a snap and it was done. I really like the way it fits and falls.
The overskirt worked very similarly, but is made only of two panels, the front and the back. It slopes backwards as well, so that it is longer in the back. The front panel fits snuggly on to the skirt, and is curved in the centre, while the back was very wide so it could be pleated over the bustle.
So I only had two seams to sew. I sewed the back to the front at the side seams, and left a six inch gap on the right side seam. This would be covered with self made trim. I pleated the top and fit a waistband the same way. I added a hook and eye (I’m terrible at positioning these right) and snaps so that the slit closed. I then hemmed the edges and gathered and sewed lace to it, the same way I did to the collar on the bodice.
I didn’t take any photos of the skirts at this point, as I was motoring onwards towards the self-made trim, which will be my next post!
Before the summer, I came across this photo of an 1871’s evening gown held at the Fashion Museum at Bath:
I’m not sure what about it made me go ‘oh my god’ but I did. And in the summer, I found some very cheap though enchanting light blue fabric that I bought with the intention of using it for this dress. I am sort of disappointed now, because it’s a very light and soft sort of fabric and I wish I’d bought something more lavender and taffeta/silk-ish for this project. Nevertheless, everything seemed to be prepared.
With every historical project, the trick is to start from the inside out. This dress is dated 1871 which means it falls into the Early Bustle period, where the Victorian skirt widths were pushed backwards into a rather generous backside. However, those skirt support cages seemed so complicated so I made a weak attempt with manipulating my existing bum rolls and sorts.
As you can see, it keeps the 18th century shape so I went ahead and bought a pattern by Truly Victorian TV108 – Grand Bustle. It worked really well and I’m very happy with the shape! I paired it with a petticoat made from another pattern by Truly Victorian and my existing Victorian corset, pattern by Redthreaded.
Before and after the petticoat! So after the foundations were sorted, it was time to move onto the dress. I wanted to keep it quite close to the original garment, so I tried to mimic the seams locations.I draped the pattern on my dressform and then transferred it to paper. It need quite a few alterations as the seams were at a few awkward places and I still have a lot to learn about fit. Nevertheless, I made two mock-ups and I was happy enough to go forward.
I cut the fabric out of something similar to cotton twill and then from the fabric. I had to interface both of these layers because they were too soft to make a stiff bodice (this goes back to the poor fabric decision). I used the lining twill to cut out the outer fabric so that it made sure they were about the same size (plus it already had seam allowances).
Then I flatlined all the pieces together and assembled them with 1/2” seam allowance. I did a quick fitting and though I noticed that the shoulders, armhole and back were a bit off, I thought it would sort itself out once I’d turned all the edges inwards by the seam allowance.
I regret not trying to fix it properly at this stage. Maybe if I had, the bodice would fit a lot better by the end. Nevertheless, I went ahead and pressed all seams and sewed them down to create some boning channels.
I used zip/cable ties for boning, since the bodice is meant to be worn over a corset already. I boned all the channels and then turned the upper, side and lowers edges inwards by 1/2” inch. I also turned the back edges inwards by half an inch twice and sewed it down to form a boning channel. However, because I hadn’t added seam allowances to the back, this was too small. I had expected that this would make it fit well for a lace-up back but it was far too small. I ended up altering these later to give the bodice a bit more room in the back (unfortunately not enough, it still has an ugly gap). At this point, I also sewed on the eyelets. It was far too early for them so this was a mistake! As I had to resew the back boning channels, it meant that the eyelets are now too far away from the edge and they look so awkward.
Then I decided to move onto the collar. The original dress has what looks like gathered tulle in the collar. I’m sad I didn’t have the reference photo next to me while I figured out the collar because I’m unhappy with some decisions. I draped it by pinning some left over fabric to the existing bodice and then drawing the shape. I accidentally made it deeper in the front and wider in the shoulders than it should be.
Then I cut it out of the actual fabric as a base for the gathered material.I made some notches and started turning edges inwards when I realised this would leave the gathered material’s edges raw, so I decided to bind it with bias tape instead.
Instead of tulle, I decided to gather some lace. Because I love lace. As I made the collar/bertha very deep in the front, the lace wasn’t wide enough to cover it. I thought it would look fine when I bound the edges, but the gap really bothers me now. A lot. So I think I may embellish over it later to try and make it more pleasing.
So then it was time to make some bias tape! I wanted it to match the fabric, so I decided to make it. This was the first time I made bias tape, so I looked at a few different tutorials online and went ahead. My first step was to cut 2” wide strips of my fabric at a specific angle, which involved some folding. This was very easy with my clear quilting ruler.
Then I had to pin all the strips together and sew them, also at an angle.
This meant I now had one long strip. I took it to my ironing board and ironed the edges so that they met in the middle, which left me with 1” wide bias tape. I pinned it to the bertha so that it wrapped around and then hand-sewed it to hide stitches.
Then I sewed on a piece of ribbon which you can see in the inspiration dress. This ribbon hid the gathering stitches on the lace! It was the closest I could find in colour to my fabric. This fabric is a very pale blue, that looks mostly white in photos (though it isn’t!). It also looks sparkly in some lights, so it’s obviously some sort of mythical creation that has come to bless my days. Later, I found some other ribbon with a smoother colour that I liked better, so I replaced it. The original dress has fringe trim around the edges of the collar, but I couldn’t find any to buy that didn’t remind me of curtains. So instead I decided to go with gathered lace (because I LOVE LACE). This is a very pretty wide lace I bought in Portugal last time I was home and I’m very happy with how it looks.
It’s lace, so of course it was. I was having some trouble calculating how much I would need to add to the overskirt, as that had fringe trim as well that I would be replacing with this lace. Since I hadn’t made the overskirt yet, I couldn’t calculate properly. I was afraid of running out of lace, so I decided to gather it by hand so that I could control how much gathering went on. I was trying to gather it very lightly, so it came to about x 1.5.
Just had to pin it on and hand sew it. I’m not a fan of visible top-stitching, so I try to keep the most noticeable bits hidden. Which means a lot of hand sewing, but I enjoy it! (Plus I sort of binge watched all of Dowton Abbey while making this dress).
Then I sewed on the bertha with some slip stitches. I realised I should have sewn it on before I hand sewed the eyelets (BIG sigh), so the back looks a mess. Imma try to attach some snaps so that it can sit properly on the bodice. During this process, I had also decided not to line the bodice. I hadn’t planned on it, hadn’t thought it would be necessary, but with the seam allowance boning channels, they were fraying so much that the insides were really messy. So I took my lace tape and hand-sewed it over every turned edge of the inside of the bodice. I’ve ran out of lace tape and it is impossible to find in the UK, so until I find a solution, there will be no photo of the inside of the bodice!
And that is it for the bodice! I only have some inside tidying to do. The next post will be about the skirt and the overskirt (and maybe the sleeves!).